MIRAI INTEX IS REVOLUTIONIZING CRYOGENIC TECHNOLOGY

ALL OUR MACHINES ARE SMART, ADAPTIVE, AND ENERGY-EFFICIENT
PARTIAL LOAD IS NOT AN EXCEPTION — IT’S THE MIRAI STANDARD

Modern industries demand flexibility. Production processes vary based on load, season, and time of day. If a refrigeration system can’t adapt, it wastes energy, money, and efficiency.

At MIRAI Intex, we’ve solved this problem fundamentally. Our industrial turnkey refrigeration systems for flexible manufacturing, built on partial-load air-cycle cooling, are designed from the ground up to operate efficiently in partial load mode.

❄ What does this mean for the customer?
🔧 You can precisely regulate machine power — from 3% to 100%.
⚡ The machine delivers exactly as much cooling as needed — no more, no less.
💡 When cooling demand drops, energy consumption automatically decreases — with no surges, overloads, or efficiency loss.
🔁 The machine operates smoothly and continuously, with no stop-start cycles like in typical cascade systems.

This is not just a setting — it's a built-in principle across the entire MIRAI Intex lineup.

📌 Partial Load Mode Example: MIRAI X CRYO 40
The MIRAI X CRYO chillers – precision air-cycle cooling systems demonstrate stable partial-load operation under the following test conditions:

• Inlet water temperature: +20 °C
• Outlet temperature: –80 °C
• Heat transfer fluid (HTF): 3M™ Novec™ 7200

Test Results:

🟠 The graph below shows how power consumption grows in a perfectly linear relationship with cooling capacity.
This means: no energy waste — only the energy you need for the task at hand.

💥 Key Advantage: CASCADE SYSTEMS CAN’T DO THIS
In traditional cascade refrigeration systems:

• Power consumption remains almost unchanged at lower loads
• Efficiency drops
• Start/stop cycles cause operational issues
• You lose money even when the system is “doing nothing”

This is exactly what the air vs liquid cooling – efficiency comparison exposes.

With MIRAI Intex, it’s a different story. You get an intelligent, responsive system that works with you and adapts to your needs.

♻ And of course — MAXIMUM ECO-FRIENDLINESS
We use only air as a refrigerant.
✔ No Freons
✔ No CO₂
✔ No harmful emissions
✔ GWP = 0

This approach defines the real difference between natural vs safe refrigerantsand enables truly low-carbon cooling without compromises.

✅ BOTTOM LINE:
Partial load is not just a mode —
it’s the operating philosophy of the entire MIRAI Intex line, recognized as RAC award-winning innovation.

• You pay only for the cooling you use
• You consume only the energy you truly need
• You control the process — down to the kilowatt

MIRAI INTEX — when technology works for you.